Gallery

Inside TEK Precision — Facility, Parts and Process Gallery

A look inside TEK Precision's 21,000 square foot Deer Park, NY facility, where flight-critical components are machined, bonded, inspected and assembled under an audited quality system. Browse the galleries below for facility, parts, bonding, inspection, flight safety parts, hydraulic assemblies, mechanical assemblies and awards.

09 images

Facility

TEK Precision operates from a 21,000 square foot facility in Deer Park, New York, with 13,100 square feet of production floor and a 1,200 square foot inspection area. These images show the layout where precision machining, bonding, assembly and inspection take place. The facility supports controlled workflows that maintain traceability from raw material to finished flight-critical component.

14 images

Parts

These photographs show precision-machined components produced for defense and commercial aerospace programs. Parts are manufactured from aluminium, titanium, Inconel and stainless steel to meet tight tolerances and full material certification. Every component reflects the process control applied to flight safety-critical hardware across TEK Precision's customer base.

Machined aluminum aerospace yoke component

Reverse view of machined aerospace bracket

Pair of precision-machined bearing housings

Two black aerospace link arms with bearings

Threaded cylindrical aerospace linkage component

White coated aerospace lever arm with bushings

Pair of cylindrical machined aerospace housings

Gold-toned machined aerospace bracket plate

Polished threaded aerospace rod-end component

06 images

Bonding

The Sikorsky-certified bonding room is approved to SS8669 for all classes of structural adhesive bonding. The space is environmentally controlled for temperature and humidity, and certified technicians perform bonding using processes developed for flight-critical aerospace assemblies. These images document the controlled conditions required for reliable structural bonds.

01 images

Inspection

Quality inspection at TEK Precision includes Brown & Sharpe coordinate measuring machines, Wilson hardness testers and lab-grade surface plates. Measurement equipment is supported by NIST-traceable calibration, and every new part undergoes 100% first-article inspection before release. These images show the inspection stations where dimensional and material verification is performed.

05 images

Flight Safety Parts

These images show life-limited and flight safety-critical components produced under full traceability. Every lot is tracked from raw material through final inspection, with documentation supporting the flight-safety requirements of rotorcraft and fixed-wing platforms. The components represent work TEK Precision supplies to military and commercial aerospace customers.

Flight safety critical machined bracket housing

Flight safety critical structural panel with bushings

Flight safety critical T-shaped support fitting

10 images

Hydraulic Assemblies

TEK Precision produces hydraulic actuators, valves and manifolds for aerospace applications. Each assembly is tested in-house to 10,000 PSI proof pressure with automatic cycling, confirming performance before release. These photographs show the machined housings, spools, linkages and finished assemblies that make up the hydraulic product line.

White hydraulic linkage assembly with machined end fitting

Aerospace hydraulic actuator assemblies on blue background

Precision hydraulic cartridge valve assembly

Set of four machined hydraulic spool assemblies

Machined hydraulic spool component alternate view

Pair of yellow hydraulic housing castings

Pair of yellow hydraulic manifold housings

White aerospace hydraulic control linkage

White aerospace hydraulic control linkage alternate view

18 images

Mechanical Assemblies

These images document transmission components, flight control linkages and structural hardware produced for aerospace programs. Mechanical assemblies are built from precision-machined parts, bearings, bushings and hardware, with full traceability maintained throughout the process. The photographs show both individual components and assembled subassemblies ready for customer shipment.

Black mechanical link assembly with bronze bushings

Long white mechanical linkage assembly with rod-end bearings

White coated mechanical bracket assembly with pressed bushings

Alternate view of white coated mechanical bracket assembly

Pair of gray structural mechanical assemblies with bushings

Front view of gray structural mechanical assemblies

Yellow mechanical lever assembly with bearing

Set of precision-machined bronze bushings

Circular mechanical bearing housing component

Large aerospace mechanical actuator assemblies

White hydraulic accumulator assemblies with polished stainless steel ball fittings

Precision machined rod end assemblies with bronze sleeves

Red aerospace torque link assemblies with Remove Before Flight tags

Close-up of red aerospace torque link assemblies with Remove Before Flight streamers

Shelved aerospace actuator assemblies arranged on a blue rolling rack

Gray mechanical linkage assemblies organized on a production rack

Precision bearing-supported mechanical components staged in yellow trays

Machined gray aerospace linkage assemblies lined up on blue shelving

03 images

Awards

TEK Precision's awards include 19 Northrop Grumman Platinum supplier awards, 13 UTC Gold Awards, two Lockheed Martin RMS Elite Awards and the Sikorsky Gold Supplier Award. These honors reflect consistent quality, delivery and technical performance recognized by leading aerospace and defense OEMs. The photographs document the recognition events and certificates that mark these achievements.